1060 Winnipeg Street, Regina, SK | (866) 848-6111 | info@hillmanav.com
© 2024 Hillman Audio Video Inc. All rights reserved. Design by StorySite.
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Power Inserter - Twisted Pair - Four Sets of Outputs - Signal Loop-through
Series:
Model: FP-TP4PW
- Power Four Sets of Remote Senders and Receivers from a Convenient Location
- 24 Vdc Input on dc Power Jack or Full-Size Terminal Block
- Power Bus Provides Expansion to Adjacent Power Inserters
- Blue Power LED Shows Module is Receiving Power
- Green LEDs Indicate Correct dc Output Voltage on RJ45s
Product Info
Tech Specs
Related Products
Documents
The FP-TP4PW is a four output power inserter compatible with RDL twisted pair products. It is powered from a 24 Vdc power supply using either one of the power jacks or the terminal block. Power jacks are provided at each end of the module to facilitate chaining multiple FP-TP4PWs from a single power supply. Four dual-RJ45 jack sets are provided to connect remote twisted pair senders and receivers. Power is provided to all modules connected to the RJ45 jacks. Signal pairs feed through the associated RJ45s. The voltage feeding each dual-RJ45 jack set is separately protected by an automatically resetting fuse. A power LED is associated with each dual-RJ45 jack set, facilitating identification of wiring faults. Module power is indicated by a front-panel LED.
- Power Four Sets of Remote Senders and Receivers from a Convenient Location
- 24 Vdc Input on dc Power Jack or Full-Size Terminal Block
- Power Bus Provides Expansion to Adjacent Power Inserters
- Blue Power LED Shows Module is Receiving Power
- Green LEDs Indicate Correct dc Output Voltage on RJ45s
- Two Associated RJ45s Provided for Each Power Output
- One Associated RJ45 may Power Receivers
- The Other Associated RJ45 may Power Senders
- Outputs (4): Dual-RJ45
- Indicators (5): Power In (1); Power Out (4)
- Power Connections (3): Power Jack (2); Terminal Block
- Power Requirement: 24 Vdc @ 25 mA plus connected loads
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Depth: 1.11 in
- Height: 3.25 in
- Width: 5.65 in
- Shipping Weight: 0.80 lbs
D-BT1A
- Wall-mounted Bluetooth Audio Format-A Interface
D-TPR1A
- Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output
D-TPR2A
- Active Two-Pair Receiver - Twisted Pair Format-A - Stereo Phono jack Outputs
D-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo phono outputs
D-TPS1A
- Active Single Pair Sender Twisted Pair Format-A XLR Microphone Input with Phantom
D-TPS2A
- Active Two Pair Sender Twisted Pair Format-A Stereo RCA Jack Inputs
D-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In
D-TPS3A
- Active Three Pair Sender Twisted Pair Format-A XLR Microphone & Stereo RCA In
D-TPSL1A
- Active Single Twisted-pair Format-A Sender
D-TPSL2A
- Active Two Twisted-pair Format-A Sender
D-TPSM2A
- 2-pair Audio Sending Module, White
DB-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In
DB-TPSM2A
- 2-pair Audio Sending Module, Black
DS-BT1A
- LED Status Indication Wall-mounted Bluetooth Audio Format-A Interface
DS-TPR1A
- Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR mic/line output
DS-TPR2A
- Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - stereo phono jack outputs
DS-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo phono out
DS-TPS1A
- Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic input w phantom
DS-TPS2A
- Active Two-Pair Sender - Twisted Pair Format-A - Stainless - stereo phono jack inputs
DS-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone & Stereo Mini-jack In
DS-TPS3A
- Active Three-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic & stereo phono in
DS-TPSM2A
- 2-pair Audio Sending Module, Stainless Steel
FP-TPX3A
- Format-A Twisted Pair Remote Controlled Mixer
RU-TP4PW
- Power Inserter - Twisted Pair - four sets of outputs - signal loop-through
RU-TPDA
- Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs
RU-TPS4A
- Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs
TX-TP1PW
- Power Inserter
TX-TPR1A
- Active Single-Pair Receiver
TX-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs
TX-TPR6A
- Passive Single-Pair Receiver, Twisted Pair Format-A
TX-TPS1A
- Active Single-Pair Sender, Twisted Pair Format-A
TX-TPS3A
- Active Three-Pair Sender, Twisted Pair Format-A
TX-TPS6A
- Passive Single-Pair Sender, Twisted Pair Format-A
Datasheet for Power Inserter - Twisted Pair
250649 kb
- Other
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Hillman Audio Video, Inc.
close
Hillman Audio Video, Inc.
1060 Winnipeg Street
Regina, SK S4R 8P8
Canada
8668486111
www.hillmanav.com
Contact in regards to this product:
Radio Design Labs
Model: FP-TP4PW
Request more information from a dealer near you
close
Request more information from a dealer near you