Signal Processing Systems : Related Signal Processing Products : RDL, Radio Design Labs - DS-TPS2AM

All Products

Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone & Stereo Mini-jack In

Model: DS-TPS2AM

Mini-jack -10 dBV Stereo Line Input Summed to Mono
MIC Feeds Pair A; Mini-jack Feeds Pair B
Remote Powering through Twisted Pair Cable
Fused Local Power Feeds all Connected Modules
Local Power Input on Terminal Block

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The D SERIES-TPS2AM modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The -TPS2AM models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS2AM features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS2AM features a black front-panel laminate. The DS-TPS2AM is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.

APPLICATION: The D SERIES-TPS2AM modules features an XLR microphone input and a stereo Mini-jack input summed to mono. The unbalanced Mini-jack inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The buffered Mini-jack input is routed to output cable pair B.

The D SERIES-TPS2AM may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS2AM may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.

RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Mini-jack -10 dBV Stereo Line Input Summed to Mono
MIC Feeds Pair A; Mini-jack Feeds Pair B
Remote Powering through Twisted Pair Cable
Fused Local Power Feeds all Connected Modules
Local Power Input on Terminal Block
Blue LED Indicates Module is Powered
Utilizes Two Format-A Pairs
Studio-Quality Precision Active Balanced Circuitry

Spec Sheet available - Yes

Crosstalk: Line to Line: < 90 dB (1 kHz); < 75 dB (20 Hz to 20 kHz); Line to Mic (HIGH Gain): < 65 dB (1 kHz), < 60 dB (20 Hz to 20 kHz);
Depth: 1.89 in
Frequency Response: Mic: 100 Hz to 30 kHz (+/- 1 dB); integral low-cut filter -10 dB @ 30 Hz; Line: 20 Hz to 50 kHz (+/- 0.5 dB)
Gain: Mic: 50 dB (NORM) or 63 dB (HIGH), Switch-selectable on rear panel; Line: 12 dB
Height: 4.11 in
Output: RDL TP Format-A
Width: 1.60 in
Shipping Weight: 0.39 lbs
Input Level: Mic: -45 to -65 dBu Balanced; Maximum: -40 dBu (HIGH Gain), -28 dBu (NORM Gain); Line: -10 dBV Unbal.; +8 dBV Max
Indicator: Power In
CMRR: Mic: > 60 dB (HIGH Gain 50 Hz to 150 Hz), > 65 dB (NORM Gain 50 Hz to 150 Hz)
THD+N: Mic: < 0.1% (80 Hz to 20 kHz); Line: < 0.05% (20 Hz to 50 kHz); <0.005% (1 kHz)
Output Connection: RJ45
DC Voltage: 24 Volts
Noise below +4 dBu: Mic: < -80 dB (NORM Gain), < -70 dB (HIGH Gain); Line: < -95 dB
Headroom above +4 dBu: > 18 dB
Mounting Box Minimum Depth: 2.4" (6.1 cm)
Inputs (3): Mic: 1.2 kOhm Balanced with IEC 24 Vdc Phantom; Line (left and right): 10 kOhm Unbalanced
Input Connectors (2): XLR female with gold contacts (1); Mini-jack (1)
Format-A Signal Pairs Used (2): A (Mic); B (Unbal Line inputs, summed to mono)
Product Weight: 0.25 lbs
Operating Temperature (Maximum): 131 F
Operating Temperature (Minimum): 32 F
Current Draw: 0.07 Amps
Tariff code: 8543.70.9960
Line to Mic (NORM Gain): < 75 dB (1 kHz), < 70 dB (20 Hz to 20 kHz)
ower Connections (2): Detachable terminal block; RJ45

D-TPR1A - Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output

D-TPR2A - Active Two-Pair Receiver - Twisted Pair Format-A - Stereo Phono jack Outputs

D-TPR3A - Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo phono outputs

D-TPS1A - Active Single Pair Sender Twisted Pair Format-A XLR Microphone Input with Phantom

D-TPS2A - Active Two Pair Sender Twisted Pair Format-A Stereo RCA Jack Inputs

D-TPS2AM - Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In

D-TPSL1A - Active Single Twisted-pair Format-A Sender

D-TPSL2A - Active Two Twisted-pair Format-A Sender

DB-TPS2A - DB-TPS2A Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

DB-TPS2AM - Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In

DB-TPSL1A - Active Single Twisted-Pair Sender

DB-TPSL2A - Active Twisted Two-Pair Format-A Sender

DS-TPR1A - Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR mic/line output

DS-TPR2A - Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - stereo phono jack outputs

DS-TPR3A - Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo phono out

DS-TPS1A - Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic input w phantom

DS-TPS2A - Active Two-Pair Sender - Twisted Pair Format-A - Stainless - stereo phono jack inputs

DS-TPSL1A - Active Single Twisted-Pair Format-A Sender, Silver

DS-TPSL2A - Active Two Twisted-Pair Format-A Sender, Silver

FP-TP4PW - Power Inserter - Twisted Pair - Four Sets of Outputs - Signal Loop-through

FP-TPX3A - Format-A Twisted Pair Remote Controlled Mixer

RM-D9 - Rack Mount for 9 Decora® Modules

RU-TP4PW - Power Inserter - Twisted Pair - four sets of outputs - signal loop-through

RU-TPDA - Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

RU-TPS4A - Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

TX-TP1PW - Power Inserter

TX-TPR1A - Active Single-Pair Receiver

TX-TPR3A - Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs

TX-TPR6A - Passive Single-Pair Receiver, Twisted Pair Format-A

TX-TPS1A - Active Single-Pair Sender, Twisted Pair Format-A

TX-TPS6A - Passive Single-Pair Sender, Twisted Pair Format-A

Two-Pair Sender 1056992 kb - Data Sheet

Project List

CP-1
Single Cover Plate - white

CP-1B
Single Cover Plate, Black

CP-1G
Single Cover Plate - gray

CP-1S
CP-1S Single Cover Plate, Stainless Steel

CP-2
Double Cover Plate - white

CP-2B
Double Cover Plate, Black

CP-2G
Double Cover Plate, Gray

CP-2S
CP-2S Double Cover Plate, Stainless Steel

CP-3
CP-3 Triple Cover Plate - white

CP-3B
Triple Cover Plate, Black

CP-3G
Triple Cover Plate, Gray

CP-3S
CP-3S Triple Cover Plate, Stainless Steel

CP-4
CP-4 Quadruple Cover Plate - white

CP-4B
Quadruple Cover Plate, Black

CP-4G
Quadruple Cover Plate, Gray

CP-4S
CP-4S Quadruple Cover Plate, Stainless Steel

DC-1B
Desktop or Wall Mounted Chassis, Holds 1 Decora-style Remote Controls and Panels, Black

DC-1G
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-1W
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-2B
Desktop or Wall Mounted Chassis, Holds 1/2 Decora-style Remote Controls and Panels, Black

DC-2G
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-2W
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-3B
Desktop or Wall Mounted Chassis, Holds 1/2/3 Decora-style Remote Controls and Panels, Black

DC-3G
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-3W
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-4B
Desktop or Wall Mounted Chassis, Holds 1/2/3/4 Decora-style Remote Controls and Panels, Black

DC-4G
Desktop or Wall Mounted Chassis for Remote Controls and Panels

DC-4W
Desktop or Wall Mounted Chassis for Remote Controls and Panels

RM-D3
19" Rack Mount for 3 Decora® Modules

SMB-1B
Surface Mount Box for Decora® Remote Controls and Panels, 2.88" Width, Black

SMB-1G
Surface Mount Boxes for Remote Controls and Panels

SMB-1W
Surface Mount Boxes for Remote Controls and Panels

SMB-2B
Surface Mount Box for Decora® Remote Controls and Panels, 4.69" Width, Black

SMB-2G
Surface Mount Boxes for Remote Controls and Panels

SMB-2W
Surface Mount Boxes for Remote Controls and Panels

SMB-3B
Surface Mount Box for Decora® Remote Controls and Panels, 6.62" Width, Black

SMB-3G
Surface Mount Boxes for Remote Controls and Panels

SMB-3W
Surface Mount Boxes for Decora® Remote Controls and Panels

SMB-4B
Surface Mount Box for Decora® Remote Controls and Panels, 8.43" Width, Black

SMB-4G
Surface Mount Boxes for Remote Controls and Panels

SMB-4W
Surface Mount Boxes for Decora® Remote Controls and Panels

WB-1U
Universal Wall Box, Single

WB-2U
Universal Wall Box, Double

Suggested Products

HDMI 8K Signal Analyzer

by AVPro Edge

Additional Dante Solution for TF Series

by Yamaha Corporation

HDMI 8K Signal Generator

by AVPro Edge

AV-iQ Terms and Conditions | | Powered by AV-iQ

1060 Winnipeg Street, Regina, SK | (866) 848-6111 | info@hillmanav.com