1060 Winnipeg Street, Regina, SK | (866) 848-6111 | info@hillmanav.com
© 2024 Hillman Audio Video Inc. All rights reserved. Design by StorySite.
p>< strong>DisplayPort Extender for Digital Signage or Displaying Video in Schools or Trade Show Booths< /strong>< /p> < p>This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127F-1A1-MM-DD extends 4K video and stereo audio signals from a DisplayPort (DP) source device to a DisplayPort monitor up to 985 feet (300 meters) away via user-supplied duplex multimode LC fiber cabling.< /p> < p>< strong>Transmits Crystal-Clear 4K DisplayPort Video with Multi-Channel Audio and 4:4:4 Color< /strong>< /p> < p>The B127F-1A1-MM-DD supports Ultra HD video resolutions up to 4K x 2K (3840 x 2160) at 30 Hz with full, rich uncompressed DTS-HD, Dolby AC-3 and 8-channel LPCM digital audio. Built-in equalization automatically fine-tunes the image quality at the remote display with no time-consuming manual fiddling needed. It’s compatible with HDCP 2.2, DisplayPort 1.2a and EDID standards for carrying HDR (high dynamic range) signals. It also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.< /p> < p>< strong>DIP Switches Extend Your Choice of USB, IR or RS-232 Signals< /strong>< /p> < p>The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1, bi-directional IR and RS-232 functions. Only one function can be extended at a time.< /p> < p>< strong>Plug-and-Play Operation for Quick Setup and Immediate Use< /strong>< /p> < p>The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source and the receiver to the display with DisplayPort cables (such as Tripp Lite’s P580-Series). Then, connect the two units using a duplex multimode LC fiber cable (Tripp Lite N820-Series). Connect an optional display to the transmitter’s local HDMI output to monitor the image connected to the receiver up to 985 feet away. The local port allows connection of displays with lower resolutions, such as 720p and 1080p, without affecting the 4K 60 Hz signal tra
1060 Winnipeg Street, Regina, SK | (866) 848-6111 | info@hillmanav.com
© 2024 Hillman Audio Video Inc. All rights reserved. Design by StorySite.