2-channel Wireless RF Receiver

Series: AD

Model: AD4D

Wide tuning range up to 184MHz
True digital diversity reception per channel for drop-out resistance
Networked control with Wireless Workbench® and ShurePlus™ Channels app
Front panel headphone jack enables Dante Cue and Dante Browse monitoring
Configurable Ethernet switch for redundant Dante digital output

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Other Options

The AD4D Axient Digital Dual Receiver sets a new standard in transparent digital audio and maximum spectral efficiency. Groundbreaking performance features include wide tuning, low latency, and High Density (HD) mode, ensuring solid performance in the most challenging RF environments. Networked control and signal routing options bring a new level of management and flexibility to your entire workflow. Compatible with all Axient Digital transmitters.

Wide tuning range up to 184MHz
True digital diversity reception per channel for drop-out resistance
Networked control with Wireless Workbench® and ShurePlus™ Channels app
Front panel headphone jack enables Dante Cue and Dante Browse monitoring
Configurable Ethernet switch for redundant Dante digital output
AES3 output
Channel Quality meter displays RF signal-to-noise
Locking AC connectors
Optional DC module available to support redundant power

Wireless Receiver Transmission - RF
Wireless - Yes
Spec Sheet available - Yes

Depth: 13.10 in
Height: 1.70 in
Product Weight: 10.10 lbs
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 0.26 Amps
Width: 19 in
Housing: Steel, Extruded aluminum
Thermal Dissipation: Maximum: 23 W (78 BTU/hr), Idle: 15 W (52 BTU/hr)
Audio Output:
•Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
•Configuration: 1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
•Impedance: 100-ohm
•Full Scale Output: 1/4" (6.35 mm): +8 dBV XLR: LINE setting= +18 dBV, MIC setting= –12 dBV
•Mic/Line Switch: 30dB pad
•Phantom Power Protection: Yes
NETWORKING:
•Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
•Network Addressing Capability: DHCP or Manual IP address
•Maximum Ethernet Cable Length: 100 m (328 ft)
Cascade output:
•Connector Type: BNC
•Note: For connection of one additional receiver in the same band
•Configuration: Unbalanced, passive
•Impedance: 50-ohm
•Insertion Loss: 0dB, typical
RF Input:
•Spurious Rejection: >80dB, typical
•Connector Type: BNC
•Impedance: 50-ohm
•Bias Voltage 12 to 13.5VDC, 150mA maximum, per antenna, switchable on/off
•RF Carrier Frequency Range
•AD4D=A: 470-636MHz
•AD4D=B: 606-810MHz
•AD4D=C: 750-960MHz
Number of Channels: 2