Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Switching Power Supply Distributor
Series: TX
Model: TX-PD8X
- Distribution of 24 Vdc Power
- Soft-Start from Switching Supply
- Outputs may be Activated by an External Switch
- Outputs may be Activated by an Open-Collector closure to ground
- Directly Controllable by RDL Remote Controls
Product Info
Tech Specs
Related Products
Documents
The TX-PD8X is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to eight modules from a single power supply. The current limiting circuitry in many switching power supplies will cause the supply to shut down upon power-up when a high current capacitive load is connected. Upon application of power, the TX-PD8X ramps the voltage up, charging any load capacitance as quickly as possible, then switching full voltage to the load. If reverse polarity is connected to the input, the TX-PD8X disconnects the load until the condition is corrected.
In system design, various modules are frequently operated from a single power supply. Good engineering practice requires that the power wiring to each module originate at the power supply output. The TX-PD8X serves as the power source for each of eight modules. The TX-PD8X normally provides power to ground-referenced modules. A front-panel switch permits the installer to enable external control. When the ON terminal is connected to ground, the TX-PD8X outputs are active. External control is possible using RDL detection or control modules, open-collector outputs from OEM equipment or controllers, or using a D-RT2 RDL remote wall control. The front-panel blue LED remains illuminated when the outputs are active.
- Distribution of 24 Vdc Power
- Soft-Start from Switching Supply
- Outputs may be Activated by an External Switch
- Outputs may be Activated by an Open-Collector closure to ground
- Directly Controllable by RDL Remote Controls
- Up to 8 Power Distribution Points
- Voltage Presence Indication
- Reverse Voltage Protection
- Warranty - Yes
- Spec Sheet available - Yes
- Circuit Breaker: 2 Amps
- Current Draw: 2 Amps
- DC Voltage: 24 Volts
- Shipping Weight: 0.19 lbs
- Warranty (Length/Type): 3 Years Limited
- Indicator: Power LED
- Package Type: Cardboard Box
- Package dimensions: 2 x 2 x 4 in
AMS-TS1
- Illuminated Touch-Activated Pushbutton
tx-pd8x[1].pdf
1300 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Hillman Audio Video, Inc.
close
Hillman Audio Video, Inc.
1060 Winnipeg Street
Regina, SK S4R 8P8
Canada
8668486111
www.hillmanav.com
Contact in regards to this product:
Radio Design Labs
Model: TX-PD8X
Request more information from a dealer near you
close
Request more information from a dealer near you