Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Audio Monitor Panel - 12 Line or Speaker Inputs
Series:
Model: RM-MP12A
- Twelve Individually Selectable Audio Inputs
- Selectable Operating MODE Provides Interlocking Source Selection or Mixing Multiple Sources
- LED Above Each Button to Show Selected Source
- VU Ballistic LED Above the Button for Each Input
- Calibrated Front-Panel Meter Display
Product Info
Tech Specs
Documents
Each RM-MP12 input may be individually calibrated for unbalanced consumer, balanced professional, 8 Ohm speaker line or constant voltage speaker lines. There is a variable intensity LED on the front panel to show audio presence for each input. If the RM-MP12 is set to the interlocking operating mode, front-panel pushbuttons select one of the twelve inputs to feed the calibrated meter, front-panel speaker (or external speaker if connected) and headphone jack. In the mixing mode, the buttons allow the use to mix multiple sources. The front-panel volume knob controls the audio level of the front-panel headphone jack, front-panel speaker, external speaker output and variable line level (+4 dBu) rear-panel output. A separate fixed line-level output is provided.
- Twelve Individually Selectable Audio Inputs
- Selectable Operating MODE Provides Interlocking Source Selection or Mixing Multiple Sources
- LED Above Each Button to Show Selected Source
- VU Ballistic LED Above the Button for Each Input
- Calibrated Front-Panel Meter Display
- Front-Panel Speaker and Headphone Jack
- Front-Panel VCA Control for Headphone and Speaker Output Levels
- Internal 4.5 W RMS Power Amplifier and Speaker
- Audio Inputs and Outputs on Detachable Terminal Blocks
- Inputs (12): +4 dBu, 25 V, 70.7 V, 100 V (set by rear-panel switches)
- Input Level: -11 dBu to +9 dBu (+4 dBu input) 25 V, 70.7 V, 100 V (calibrated with gain trim set fully counter-clockwise)
- Headroom: > 18 dB (above calibrated input level)
- Gain: 0 dB to 20 dB (Adjustable for speaker-level input, 25-turn trim potentiometer) -5 dB to 15 dB (+4 dBu input)
- Frequency Response: 10 Hz to 20 kHz (+/-0.25 dB)
- THD+N: < 0.010% (20 Hz to 20 kHz)
- Intermodulation Distortion: < 0.025% (20 Hz to 20 kHz)
- Channel to Channel Crosstalk: < -80dB (10Hz to 20 kHz)
- Residual Noise: < -80 dB (Channel ON; referred to +4 dBu)
- Off Attenuation: > 80 dB (10 Hz to 20 kHz)
- Indicators per Channel (2): Red channel active LED above button; Variable intensity audio level LED for each input (minimum intensity at -15 dB, maximum intensity at 0 dB)
- CMRR: > 75 dB (50 to 120 Hz)
- Outputs (4): 150 Ohms, +4 dBu fixed level (balanced or unbalanced via plug-in terminal block) 150 Ohms, +4 dBu variable level (balanced, controlled by front-panel volume knob) 4.5 W RMS external speaker connection (use of external speaker disconnects internal speaker) 100 mW ¼-inch stereo headphone jack
- Power Requirement: GROUND-REFERENCED, 24 to 33 Vdc @ 700 mA
- Type: Standard 19” Rack-mount; 1 Rack Unit (RU)
- Dimensions:
- Height: 1.75 in 4.40 cm
- Depth: 5.35 in 13.60 cm
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Depth: 5.35 in
- Height: 1.75 in
- Shipping Weight: 3.86 lbs
Datasheet for Audio Monitor Panel - 12 Line or Speaker Inputs
222492 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Hillman Audio Video, Inc.
close
Hillman Audio Video, Inc.
1060 Winnipeg Street
Regina, SK S4R 8P8
Canada
8668486111
www.hillmanav.com
Contact in regards to this product:
Radio Design Labs
Model: RM-MP12A
Request more information from a dealer near you
close
Request more information from a dealer near you