• Inputs (3):: 1.2 kΩ balanced on XLR jack, mic-level, -55 dBu Min. (for 10 W out), -11 dBu max.(1) > 10 kΩ, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 W out), +22 dBV max. (2)
• Gain:: Off to 74 dB (mic), Off to 32 dB (line)
• Outputs (2):: Left and Right, 10 Watts RMS into 8 Ω per channel or 8 Watts RMS into 4 Ω per channel, switch-selectable output impedance
• Equalization:: ±10 dB @ 10 kHz, ±9 dB @ 80 Hz
• Frequency Response: 50 Hz to 20 kHz (±1.5 dB, mic input, 10 Watts), 35 Hz to 20 kHz (±1.5 dB, line input, 10 Watts)
• THD+N:: < 0.25%
• CMRR:: > -55 dB (mic)
• Crosstalk:: < -68 dB (1 kHz, line input)
• Phantom:: Switch-selectable 24 V (IEC 1938: 1996-12)
• Noise:: < -70 dB (below 10 Watts, -10 dBV line input), < -65 dB (below 10 Watts, -50 dBu mic input)
• 24 Vdc power supply current:: 170 mA (idle), 1000 mA (max.)
• Case dimensions:: 5.75” (14.6 cm)W x 5” (12.7 cm)D
• Mounting size:: 1/3 rack width
• Maximum Frequency Response (Bandwidth): 20 kHz
• Maximum Frequency Response (Bandwidth): 20000 Hz
• Minimum Frequency Response (Bandwidth): 50 Hz
• Minimum Frequency Response (Bandwidth): 0.05 kHz
• Number of Inputs: 3
• Number of Outputs: 2
• Total Harmonic Distortion + Noise (THD+N): 0.25 %
• DC Voltage: 24 Volts
• Depth: 5 in
• Width: 5.75 in
• Shipping Weight: 1.40 lbs

EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width

EZ-DC1
Desktop Chassis for 1/6 Rack Width for EZ Products

EZ-DC2
Desktop Chassis for 1/3 Rack Width EZ Products

EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width

EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6

EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products

EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths