1060 Winnipeg Street, Regina, SK | (866) 848-6111 | info@hillmanav.com
© 2024 Hillman Audio Video Inc. All rights reserved. Design by StorySite.
Clean, sleek, and stable. That is what you get when you install this AV over IP encoder device that fits into any standard dual-gang mud ring. Connect this MXNet wall plate to any HDMI source and it will encode the audio/video signal into a multicast data format that can be routed to any Decoder endpoint within the project/installation. This device connects directly via category cable (CAT 5e or better) to any MXNet switch. The AC-MXNET-1G-EWP is a part of the MXNet family of AV-over-IP products from AVPro Edge.
The AC-MXNET-1G-EWP will encode a full 4K 4:4:4 60Hz HDMI video signal – along with audio, control, power, and HDR metadata. These signals are passed to single or multiple Decoder endpoints via multicast routing through an MXNet or multicast compatible L3 managed network switch. It does all this with next to zero latency. MXNet Encoders encode audio/video/control signals into IP packets using an optimized JPEG2000 codec at a flexible data rate (200Mbps for 1080p content, 300Mbps for 4K30 content, 850Mbps at peak).
The AC-MXNET-1G-EWP Encoder is only one part of the MXNet Ecosystem that includes Encoders, Network Switches, Control Processors, and other various components designed to facilitate the building of a custom A/V distribution system. MXNet's Ecosystem includes formatting such as resolution scaling, full EDID management, HDR and Dolby Vision metadata, multifaceted video walls, and includes the MXNet Mentor setup and control tool - making installations easy on the integrator, while also presenting a major WOW factor for your client.
1060 Winnipeg Street, Regina, SK | (866) 848-6111 | info@hillmanav.com
© 2024 Hillman Audio Video Inc. All rights reserved. Design by StorySite.